Sewing Machine Troubleshooting

How to get a sewing machine to go through thick fabric?

To sew thick fabric, use a heavy needle, a longer stitch, slower speed and a levelled presser foot over bulky seams, and know when it's beyond your machine.

On this page
  1. The Short Answer
  2. Use the Right Needle
  3. Lengthen the Stitch
  4. Choose a Suitable Thread
  5. Help the Fabric Feed
  6. Getting Over Thick Seams
  7. Reduce the Bulk Before You Sew
  8. Speed and Power
  9. Know Your Machine’s Limits

The Short Answer

To get a home sewing machine through thick fabric: fit a heavy-duty needle such as a denim or jeans needle in a larger size, lengthen the stitch, sew slowly, and use the handwheel over the thickest spots. Level the presser foot with a hump jumper or folded scrap when climbing onto a seam, and reduce bulk where you can before sewing. A walking foot helps thick layers feed evenly. Even with all of this, every home machine has a limit, and forcing it can break needles or strain the motor.

Use the Right Needle

The needle matters most. A standard fine needle flexes in heavy fabric, which leads to skipped stitches and breakage.

  • Type: Jeans or denim needles have a stronger shaft and a sharp point designed to pierce tightly woven, heavy fabric. Leather needles have a cutting point for leather and some vinyls. Don’t use them on woven fabric, where they cut the threads.
  • Size: Heavier fabric needs a larger size. As a general guide, many sewists use around 90/14 for medium-heavy fabrics and 100/16 to 110/18 for heavy denim, canvas and upholstery fabrics. Check what your machine’s manual recommends as its maximum.
  • Condition: Start a heavy project with a new needle. Heavy fabrics dull needles quickly.

If needles keep snapping, see why your needle keeps breaking.

Lengthen the Stitch

Short stitches in thick fabric make lots of closely spaced holes and can pile thread up, which makes the machine work harder. A longer stitch, often around 3 to 4 mm for heavy fabrics, lets the fabric feed more easily and usually looks better on topstitching. Test on a scrap of the same layers.

Choose a Suitable Thread

All-purpose polyester thread is strong enough for many heavy projects. For visible topstitching on denim or bags, a heavier topstitching thread is common, used with a topstitch needle or a larger needle whose eye can take it. Many sewists keep regular thread in the bobbin and adjust upper tension to balance. Test first, as heavy thread often needs tension changes. See our tension guide.

Help the Fabric Feed

Walking foot

A walking foot (or even-feed foot) has its own feed teeth on top that move with the feed dogs below. It helps thick or multiple layers move through together rather than the top layer being pushed back. It’s useful for quilts, heavy coatings, and layers that tend to shift. Some machines have a built-in dual feed system that does the same job.

Presser foot pressure

If your machine has an adjustable presser foot pressure dial, reducing the pressure a little can help very thick layers feed without the foot dragging. Too little pressure, though, and the fabric won’t be held firmly against the feed dogs. Adjust in small steps and test.

Extra lift

Many machines let you raise the presser foot lever a little higher than its normal up position to fit extra-thick layers under the foot. Check your manual. If the fabric won’t fit under the foot at all, it is beyond what that machine is designed to sew.

Getting Over Thick Seams

Most stalls and broken needles on heavy projects happen at a cross seam, such as a jeans hem where the side seams meet.

Level the foot

When the front of the presser foot climbs onto a thick seam, the foot tilts up at the front and the feed dogs lose their grip. Slip a hump jumper (a small plastic levelling tool) or a folded piece of the same fabric under the back of the foot as you approach the seam. The foot stays level and climbs evenly. When the front of the foot comes down off the seam, move the shim to the front so it stays level on the way down.

Use the handwheel

Sew slowly up to the thick part, then turn the handwheel by hand, toward you, for a few stitches over the bulkiest point. This gives you control and lets you feel whether the needle is struggling. Once you’re past it, carry on with the pedal.

Avoid pulling or pushing the fabric to help it over. It bends the needle and is a common cause of breaks.

Reduce the Bulk Before You Sew

Some preparation makes a big difference:

  • Grade seam allowances. Trim the layers of a seam allowance to different widths so they don’t all stack at the same point.
  • Press seams open or to one side before crossing them.
  • Flatten denim seams. Many sewists tap a thick seam with a hammer, with a cloth over it, to compress the fibres before sewing across it.
  • Clip or notch to reduce bulk at corners and curves.
  • Start on the full thickness where you can, rather than stepping up onto a thick edge from nothing.

Speed and Power

Sewing slowly gives more control, but on some machines very low pedal pressure also means less force at the needle, and the machine may stall on a thick spot. If that happens, go back to using the handwheel through the thickest part rather than pressing harder on the pedal.

Some computerised machines have a speed limiter or a setting for heavy fabrics. Check your manual. If the motor hums but the needle won’t move on thick fabric, stop straight away rather than holding the pedal down. Continued stalling can strain the motor and drive. See motor runs but the needle won’t move for related problems.

Know Your Machine’s Limits

Machines sold as heavy duty are often stronger and more stable than basic models, but they are still home machines. Regular sewing of very thick leather, many layers of canvas, or heavy upholstery may be beyond what a home machine is built for, and repeatedly forcing it can knock the timing out or wear parts. Signs that a project is beyond your machine include:

  • skipped stitches that continue with the right needle and stitch length
  • needles bending or breaking even when you sew slowly and don’t pull the fabric
  • the motor labouring or stalling regularly
  • fabric that won’t fit under the raised presser foot

If you regularly sew heavy materials, a machine designed for them may be worth considering, and our comparison of industrial and domestic sewing machines explains the trade-offs. If your machine started skipping stitches or striking the hook after a hard session on heavy fabric, see our guide to timing symptoms.

The complete guide to sewing machine troubleshooting

Sewing Machine Troubleshooting: Fixing Common Stitch Problems
Read the guide

Keep exploring

Guides from other topics

All topics →