Sewing Basics

Sewing Machine Stitches Explained: Types, Length and Backstitch

What each sewing machine stitch is for, how stitch length and width work (including on Brother machines), and how to use the backstitch button properly.

On this page
  1. How Stitch Settings Work: Type, Length and Width
  2. The Essential Stitches and What They’re For
  3. Stretch and Utility Stitches
  4. Decorative, Satin and Buttonhole Stitches
  5. Stitch Length Guide
  6. How Do I Know Which Stitch to Use?
  7. What Is the Strongest Stitch on a Sewing Machine?
  8. Using the Backstitch (Reverse) Button
  9. What Stitch Length and Tension Should I Use?

Even a basic sewing machine offers more stitches than most beginners use. The good news is that a handful of them do most of the work. This guide explains what each common stitch is for, how stitch length and width change it, and how to lock your seams with the backstitch button.

How Stitch Settings Work: Type, Length and Width

Each stitch you choose is shaped by three settings:

  • Stitch type: the pattern, such as straight, zigzag or blind hem.
  • Stitch length: how far the fabric moves between needle penetrations, usually shown in millimetres. Shorter stitches are denser and firmer. Longer stitches are looser and easier to unpick.
  • Stitch width: how far the needle swings from side to side, also in millimetres. A straight stitch has no width. On some machines, adjusting the “width” of a straight stitch moves the needle position instead.

Computerised machines usually set a sensible default length and width when you select a stitch. Mechanical machines rely on you setting the dials.

The Essential Stitches and What They’re For

Stitch What it looks like Main uses
Straight stitch A single line Seams on woven fabric, topstitching, zippers, basting
Zigzag Side-to-side V’s Finishing raw edges, some stretch seams, appliqué, simple buttonholes
Three-step (multi-stitch) zigzag Each zig is made of small stitches Attaching elastic, finishing edges that pucker, mending tears
Overcast / overedge Straight stitches with a stitch wrapping the edge Finishing edges in one pass, used with an overcast foot
Blind hem Several straight stitches, then one sideways bite Nearly invisible hems on trousers, skirts and curtains
Buttonhole Two satin columns with bar tacks Buttonholes (one-step or four-step)

Stretch and Utility Stitches

  • Triple straight stitch (straight stretch stitch): the machine sews forward, back and forward again for each stitch. The result is a strong line with some give. It’s useful for crotch seams, armholes and bags, but very hard to unpick.
  • Lightning or narrow stretch stitch: a narrow zigzag-like stitch for knit seams that need to stretch.
  • Overlock-style stretch stitches: imitate an overlocker’s seam on knits.
  • Basting stitch: some machines have a dedicated extra-long stitch for temporary holding.
  • Bar tack and darning stitches: reinforce stress points, such as belt loops and pocket corners, and mend holes.

Decorative, Satin and Buttonhole Stitches

Satin stitch is simply a zigzag with a very short length, so the threads lie side by side and form a solid band. It’s used for appliqué edges, monograms and buttonhole sides. Decorative stitches, such as scallops, leaves and hearts, are mostly for embellishment. Use a stabiliser under lightweight fabric to stop puckering. Buttonhole options often include standard, rounded and keyhole styles. See our guide to sewing a buttonhole for the method.

Stitch Length Guide

These ranges are common starting points for a straight stitch. Always test on a scrap of your fabric first.

Job Typical length
Lightweight fabric, curves, reinforcing 1.5 – 2.0 mm
General seams on medium-weight woven fabric 2.2 – 2.5 mm
Heavier fabric, multiple layers 2.5 – 3.0 mm
Topstitching 3.0 – 3.5 mm
Basting, gathering 4.0 – 5.0 mm (or the longest available)

For zigzag edge finishing, a width of about 2.5–4 mm with a length of about 1.5–2 mm is a typical starting point.

What Does 2.5 Stitch Length Mean?

It means each stitch is about 2.5 millimetres long. Since an inch is 25.4 mm, that’s roughly 10 stitches per inch. Older machines and some patterns use stitches per inch (SPI), so a higher SPI number means a shorter stitch.

Stitch Length on a Brother Sewing Machine

Brother machines come in two main styles, and Brother’s own support pages describe both:

  • Mechanical models with dials: turn the stitch length dial to the number you want. Higher numbers give longer stitches. A setting near 0 stops the fabric feeding, which is used for things like bar tacks or sewing on buttons. Some models also have a marked range for satin stitches and buttonholes.
  • Computerised models with an LCD screen: select the stitch, then use the stitch length “+” and “–” keys. The screen shows the length in millimetres. When you select a stitch, the machine usually loads a default value, and for a straight stitch this is commonly around 2.5 mm.

The maximum length varies by model, commonly about 4–5 mm. Check your manual’s stitch chart for the exact range and default values on your machine. The same principles apply to most other brands.

How Do I Know Which Stitch to Use?

Ask three questions:

  1. Is the fabric woven or knit? Wovens usually use a straight stitch. Knits need a stitch with stretch, such as a narrow zigzag or a stretch stitch.
  2. Is this a seam, an edge finish, a hem or decoration? Seams usually take a straight or stretch stitch, raw edges take a zigzag or overcast, hems a straight or blind hem stitch, and decoration a satin or decorative stitch.
  3. Will the seam be under stress? If so, use a shorter stitch, a triple stitch, or a second row of stitching.

Your manual’s stitch chart often lists the suggested foot and settings for each stitch.

What Is the Strongest Stitch on a Sewing Machine?

On a typical home machine, the triple straight stitch is generally considered the strongest utility stitch, because each stitch is sewn three times. A short regular straight stitch, or two parallel rows of straight stitching, is also strong. Thread quality and fabric matter as much as the stitch, so for heavy-duty items use a suitable heavier thread and needle, as covered in sewing through thick fabric.

Using the Backstitch (Reverse) Button

Backstitching locks the threads at the start and end of a seam so it won’t unravel:

  1. Place the fabric under the foot with the needle a little in from the top edge, and lower the foot.
  2. Sew forward 3–4 stitches.
  3. Press and hold the reverse lever or button. Sew backward over those stitches, then release.
  4. Sew forward along the seam.
  5. At the end, hold reverse again for 3–4 stitches, release, and sew forward a stitch or two.

On mechanical machines the reverse control is usually a lever you hold down. On computerised machines it’s usually a button, and the machine sews in reverse at a slow speed while you hold it.

Reverse vs Reinforcement Buttons

Many computerised machines have two different buttons. A reverse button sews backward. A reinforcement or lock stitch button sews several tiny stitches in place to tie off without travelling backward. On some machines, the reverse button behaves differently depending on the stitch: with certain decorative or stretch stitches it may sew reinforcement stitches instead of reversing. If your machine seems to reverse when you don’t expect it to, see why your machine is stitching backwards.

Should You Always Backstitch?

Backstitch whenever a seam’s ends won’t be crossed by another seam or held by other stitching. Common exceptions:

  • Basting and gathering stitches, which you’ll remove or pull
  • Delicate or sheer fabrics, where a backstitch can look bulky. Tie the thread tails by hand or use a lock stitch instead.
  • Topstitching that will show, where many sewists prefer pulling the threads to the back and knotting them for a neater look
  • Seam ends that another seam will cross (some sewists skip the backstitch here)

Other Kinds of Backstitch

“Backstitch” also names a hand stitch: a strong line where each stitch goes back to meet the previous one. Related hand stitches include the prick stitch and pick stitch, which show only tiny dots on the surface and are used for hand-finished zippers and edges.

What Stitch Length and Tension Should I Use?

For most medium-weight wovens, start with a straight stitch at about 2.5 mm and leave the tension at your machine’s default. On many mechanical machines that’s around 4, and many computerised machines set it automatically. Sew a test, look at both sides, and adjust only if needed. If loops appear underneath, rethread the upper thread before changing the tension. Our beginner’s guide to using a sewing machine explains how to read a test seam.

The complete guide to sewing basics

How to Use a Sewing Machine: A Complete Beginner's Guide
Read the guide

Keep exploring

Guides from other topics

All topics →