Short Answer
Use the bobbin type your sewing machine’s manual specifies. If you don’t have the manual, look up your machine’s model number with the manufacturer or a reputable parts supplier, or compare a bobbin that came with the machine against a bobbin size chart. Bobbins that look almost identical are often a different class, and a “close enough” bobbin is a common cause of tension problems, noise and tangles.
Step 1: Check the Manual
The manual usually names the bobbin directly, for example “Class 15”, “L-style” or a part number, often in the accessories list or the bobbin-winding section. Manufacturers generally recommend their own bobbins, or a specific class, for each model. Many manuals can be downloaded from the brand’s support website if you’ve lost the paper copy.
Step 2: Look at the Bobbin That Came With the Machine
If you still have an original bobbin, it’s your best reference:
- Some bobbins are stamped or labelled with the brand or class.
- Note whether it’s metal or plastic, and whether the sides are flat or slightly curved.
- Take it with you when buying replacements, or compare it side by side with the new ones.
Step 3: Search by Model Number
The model number is usually on a label or plate on the back, the base or under the bobbin cover. Many sewing suppliers let you search for bobbins by brand and model. It’s also worth searching the manufacturer’s own accessory pages.
Step 4: Measure and Compare
If all else fails, measure the bobbin’s diameter (across the flat side) and width (the height of the bobbin, between the two flat sides) with a ruler or calipers, and compare with a bobbin size chart. WAWAK publishes one designed to be printed to scale. Small differences matter, so measure carefully.
Common Bobbin Types
Approximate sizes from published bobbin charts. Individual manufacturers’ specifications can differ slightly.
| Bobbin type | Approx. diameter | Approx. width | Notes |
|---|---|---|---|
| Class 15 (A style) | 20.3 mm (13/16”) | 11.7 mm (7/16”) | Flat sides. Common in many home machines. Plastic and metal versions exist. |
| L style | 20.3 mm (13/16”) | 8.9 mm (11/32”) | Same diameter as Class 15 but narrower. Used in some home and industrial machines. |
| M style | about 25 mm (1”) | about 10.7 mm | Larger capacity. Mostly industrial and some quilting machines. |
| Class 15J | about 20.4 mm | about 11.3 mm | Looks like Class 15 but has slightly curved sides. |
| Class 66 | about 20.5 mm | about 10.9 mm | Noticeably curved sides. Used in some older machines. |
A few key points:
- Class 15 and Class 15J are not interchangeable, even though they look very similar. The slight curve on 15J bobbins is enough to affect how they run.
- Class 66 bobbins should not be used in Class 15 machines, and vice versa.
- L-style bobbins are narrower than Class 15. Some suppliers note that an L-style bobbin will physically fit in a Class 15 machine, but a Class 15 is too wide for an L-style machine. Fitting doesn’t guarantee correct tension, so stick to what your manual specifies.
- Brand-specific bobbins exist. Some brands, such as certain Bernina, Husqvarna Viking and Singer models, use their own bobbin designs that don’t match the generic classes.
Metal or Plastic?
Material matters as much as size. A machine designed for plastic bobbins may not run correctly with metal ones, and vice versa. Weight and how the bobbin interacts with the case and any magnets or sensors can differ. Some machines, particularly those with drop-in bobbins, are designed for plastic bobbins. Many front-loading metal bobbin cases are designed for metal bobbins. Follow the manual and stick with one material.
Why “Close Enough” Bobbins Cause Problems
A bobbin that’s slightly too tall, too short, or the wrong shape can:
- Wobble or bind in the bobbin case, giving uneven lower tension
- Make clicking or grinding noises
- Cause loops, bird’s nests or skipped stitches
- Over time, potentially wear the bobbin case or hook
If you’ve started getting thread problems after buying new bobbins, try one of the original bobbins before anything else.
Buying Tips
- Buy from the machine’s manufacturer, or a supplier that lists your exact model as compatible.
- Be cautious with generic multipacks labelled “fits most machines”.
- Keep a few spares of the same type, so you can wind different thread colours.
- Throw away bobbins that are cracked, warped or have burrs on the rim.
Same Bobbin, Different Thread: Winding Tips
Even the correct bobbin can cause trouble if it’s badly wound. Wind it at a steady speed with the thread in the bobbin-winding tension guide, so it fills firmly and evenly, and don’t layer a new thread over the remains of an old one. Our guide on how to wind and insert a bobbin shows the full process, and our guide to sewing machine parts explains how the bobbin case and hook work together.