Short Answer
You can sew almost anything by hand with a needle, thread and a few basic stitches. It just takes longer. For strong seams, use a backstitch. For temporary or gathering stitches, use a running stitch. For invisible hems and closing gaps, use a slip stitch or ladder stitch, and for edges, use a whipstitch or blanket stitch. For a quick fix with no stitching at all, fusible web or fabric glue can work on some projects.
What You Need
- Hand sewing needles. A mixed pack of “sharps” suits most woven fabrics. Embroidery needles have larger eyes, which makes them easier to thread.
- Thread. All-purpose polyester or cotton thread in a colour that matches your fabric. For buttons or heavier fabric, a stronger button or upholstery thread helps.
- Sharp scissors for fabric, and small snips for thread.
- Pins or clips to hold the pieces together.
- A fabric marker or chalk, and a ruler for marking seam lines.
- A thimble (optional), which helps push the needle through thicker fabric.
- An iron, for pressing seams flat when you’re done.
Thread and Knot the Needle
- Cut a length of thread about 45–60 cm (18–24 inches), or roughly from your fingertips to your elbow or shoulder. Longer threads tangle more.
- Cut the end at an angle with sharp scissors, then pass it through the needle eye.
- Use a single or double thread. A single thread suits most seams. Doubling it (pulling both ends even and knotting them together) is stronger for buttons and repairs.
- Tie a knot: wrap the thread end around your index finger two or three times, roll it off with your thumb, and pull it tight. Or wrap the thread around the needle tip a few times and pull the needle through the wraps.
The Five Hand Stitches That Replace a Machine
Running Stitch
The simplest stitch. Weave the needle in and out of the fabric in a straight line, keeping the stitches and gaps even. Use long stitches for basting (temporary holding) or gathering, and small, close stitches for light seams that won’t be under much stress.
Backstitch
This is the strongest basic hand stitch and the closest to a machine seam:
- Bring the needle up through the fabric one stitch length ahead of the start.
- Take it down at the start point, going back.
- Bring it up again one stitch length ahead of where it last came up.
- Take it down at the end of the previous stitch, so the stitches touch.
On the top you get a continuous line of stitches, and on the back they overlap. Use it for seams in clothes, bags and toys, and for repairing split seams.
Slip Stitch / Ladder Stitch
Used for nearly invisible hems and for closing turning gaps in pillows and stuffed toys.
- For a hem: take a tiny stitch (one or two threads) in the main fabric, then slide the needle inside the fold of the hem for about 5–10 mm, bring it out, and repeat.
- For a ladder stitch across a gap: stitch inside the fold on one side, then straight across into the fold on the other side, like the rungs of a ladder. Pull the thread and the gap closes, with the stitches hidden.
Whipstitch and Blanket Stitch
- Whipstitch (overcast): the thread loops over the edge of the fabric at regular intervals. It joins two edges or stops a raw edge from fraying, much as a zigzag does on a machine.
- Blanket stitch: like a whipstitch, but each stitch catches the loop of thread before it, which forms a neat line along the edge. Often used decoratively on felt and blankets.
Catch Stitch for Hems
The catch stitch, also called the herringbone stitch, is worked from left to right in small crossing stitches between the hem edge and the main fabric. Because it forms an X pattern, it has some give. That makes it good for hems on heavier or slightly stretchy fabrics.
Which Stitch for Which Job
| Job | Best hand stitch |
|---|---|
| Seam that needs to be strong | Backstitch |
| Temporary holding, gathering | Running stitch (long) |
| Invisible hem | Slip stitch or catch stitch |
| Closing a gap after turning | Ladder stitch |
| Raw or fraying edge | Whipstitch or blanket stitch |
| Ripped seam in clothing | Backstitch from the inside |
| Buttons | Several stitches through the holes with doubled thread, then wrap the shank and knot |
How to Tie Off
On the wrong side of the fabric, take a tiny stitch and pull it until only a small loop remains. Pass the needle through the loop and pull tight. Repeat once or twice, then trim the thread, leaving a short tail. Press the seam with an iron to help the stitches settle.
Tips for Neat, Strong Hand Sewing
- Mark your stitching line with chalk or a washable pen, and follow it.
- Keep the stitches small and even. For a backstitch seam, roughly 2–3 mm stitches are a sensible target.
- Don’t pull too tight, or the fabric will pucker.
- Run the thread through beeswax or a thread conditioner to reduce tangling, if you have some.
- Let the needle hang now and then so the thread untwists.
- Work in good light.
No-Sew Alternatives
Sometimes stitching isn’t necessary at all:
- Fusible hem tape or fusible web: iron it between two layers to bond them. It’s good for quick hems on trousers or curtains, but it’s less durable than stitching and may not survive frequent washing.
- Fabric glue: works for crafts, costumes and small repairs. Check the label for washability.
- Iron-on patches: cover holes in jeans and kids’ clothes.
- Safety pins or fabric clips: temporary fixes only.
When a Machine Is Worth It
Hand sewing is ideal for mending, buttons, hems and small projects. If you find yourself making whole garments, quilts or curtains, a machine saves hours and gives more uniform seams, and our guide to sewing machine types and brands covers how to choose one. Our comparison of hand sewing and machine sewing looks at the trade-offs, and if cost is a concern, see is sewing an expensive hobby?