Machine Embroidery

How to Embroider a Name With a Sewing Machine

Four ways to embroider a name with a sewing machine: built-in alphabets, free-motion writing, zigzag satin lettering, and embroidery machine fonts.

On this page
  1. Can you embroider a name with a regular sewing machine?
  2. Which method should you use?
  3. Method 1: Built-in lettering stitches
  4. Method 2: Free-motion writing
  5. Method 3: Satin-stitch lettering with a zigzag
  6. Method 4: Fonts on an embroidery or combination machine
  7. What is the best embroidery stitch for letters?
  8. Lettering size and font tips
  9. Stabilizing names on towels, blankets and shirts
  10. Can I use any sewing machine for embroidery?
  11. Using a Brother sewing machine to embroider names

Can you embroider a name with a regular sewing machine?

Yes. You don’t need a dedicated embroidery machine to stitch a name, though the method depends on what your machine can do. Many computerized sewing machines have built-in alphabets. Almost any machine that lets you lower the feed dogs can write a name freehand. And any machine with a zigzag stitch can form satin-stitch letters if you guide it carefully. A dedicated embroidery machine, or a combination machine with its embroidery unit attached, gives the most polished, repeatable results with built-in fonts.

Which method should you use?

Method Machine needed Look Difficulty
Built-in lettering stitches Computerized sewing machine with an alphabet Small, neat, uniform letters Easy
Free-motion writing Any machine that can drop or cover feed dogs Handwritten, casual Moderate (needs practice)
Satin-stitch zigzag lettering Any machine with zigzag Bold, raised letters Harder to make even
Embroidery machine fonts Embroidery-only or combination machine Crisp, professional, any size the hoop allows Easy once you can hoop

Method 1: Built-in lettering stitches

Many computerized sewing machines include one or more alphabets, often block letters and sometimes script. The letters are usually small, a few millimeters tall, which suits labels, ribbon tags, napkins and quilt labels.

  1. Back the fabric with tearaway stabilizer, or fusible interfacing for lightweight fabric.
  2. Mark a straight guideline with a removable pen, so the name runs level.
  3. Program the name. Most machines let you string letters into memory and add a space between words. Check your manual for how to enter and edit a sequence.
  4. Attach the satin-stitch or open-toe foot your manual recommends. Its grooved underside lets dense stitches pass smoothly.
  5. Stitch a test on a scrap of the same fabric. If letters look squashed or stretched, many machines let you fine-tune the stitch-length or balance setting.
  6. Sew slowly and don’t push or pull the fabric. Let the feed dogs move it. Steering causes uneven letters.

Method 2: Free-motion writing

Free-motion writing looks like handwriting, because it is. The easiest names to write are in joined cursive, since you don’t have to stop and travel between letters.

  1. Write the name on the fabric with a removable marker. Try writing it larger than you think you need. Names under about an inch tall are much harder to control.
  2. Stabilize and hoop the fabric so it lies flat against the machine bed.
  3. Lower the feed dogs and attach a free-motion or darning foot. Then lower the presser-foot lever, which engages the tension even though the foot doesn’t press on the fabric.
  4. Bring the bobbin thread up, take a few tiny locking stitches, and trace the letters at a steady speed.
  5. Go over the name a second time for a bolder line, staying close to the first pass.

Our guide to embroidering with a regular sewing machine covers free-motion setup and practice drills in detail.

Method 3: Satin-stitch lettering with a zigzag

Satin stitch is a very short, close zigzag that forms a smooth, raised column, the same stitch most commercial lettering uses. On a regular sewing machine, you form the letters by guiding the fabric along a drawn outline.

  1. Draw large, simple block or rounded letters, at least an inch tall to start.
  2. Stabilize firmly. Dense zigzag pulls the fabric inward.
  3. Set a narrow zigzag, around 2 to 3 mm wide, and shorten the stitch length until the stitches touch without piling up. Test on a scrap.
  4. Stitch along each stroke of each letter, slowing down on curves and pivoting with the needle down at corners.
  5. For thick and thin strokes, some sewists widen or narrow the zigzag while sewing. This takes practice.

This method is the hardest to make look even. Expect to practice the letters a few times on scraps.

Method 4: Fonts on an embroidery or combination machine

If you have an embroidery machine, or a combination machine’s embroidery unit, this is the most reliable way to embroider names:

  1. Select the lettering or font function, type the name, and choose a font and size.
  2. Check spacing. Some letter pairs (like “AV” or “To”) look better pulled closer together. Many machines let you adjust spacing.
  3. Stabilize and hoop for your fabric, then center the name using the hoop’s template or the machine’s trace function.
  4. Stitch, trim jump stitches between letters, and remove the stabilizer.

Our beginner’s guide to using an embroidery machine walks through the whole process.

What is the best embroidery stitch for letters?

On a machine, satin stitch is the standard choice for most lettering, because it gives smooth, raised, legible strokes. The exceptions:

  • Very small text can be too narrow for satin. It’s often better stitched with a running stitch or a triple “bean” stitch.
  • Very large, bold letters have strokes too wide for satin to lie flat. They’re usually filled with a fill stitch instead, often edged with a satin border.

By hand, embroiderers usually choose backstitch for clean block lettering, stem stitch or split stitch for flowing script, and satin stitch to fill thick letters.

Lettering size and font tips

  • Small text is the hardest. Many digitizers suggest keeping embroidered lettering at least about 1/4 inch (6 mm) tall. Below that, letter openings like “e” and “a” tend to fill in. Simple block fonts hold up best at small sizes.
  • Script fonts need more height than block fonts to stay readable.
  • Textured fabrics swallow fine strokes. Choose bolder fonts for towels, fleece and knits.
  • Mark the center of the name, not the start, so it ends up centered on the item.

Stabilizing names on towels, blankets and shirts

  • Towels and fleece blankets: use a water-soluble topper on the front so stitches sit on top of the loops instead of sinking in, plus a tearaway or wash-away backing.
  • T-shirts and knit baby clothes: use a soft cutaway backing so the letters don’t stretch out of shape. See how to machine embroider a T-shirt without puckering.
  • Cotton and linen: a medium tearaway is usually enough.

For a fabric-by-fabric table, see our guide to choosing machine embroidery stabilizers.

Can I use any sewing machine for embroidery?

Almost any machine can do some kind of embroidery. Free-motion work only needs a way to lower or cover the feed dogs and a darning foot, and decorative or zigzag stitching works on most machines. What a regular sewing machine can’t do is stitch a digitized design file automatically. That needs an embroidery machine or an embroidery unit made for your specific combination model.

Using a Brother sewing machine to embroider names

It depends on the model:

  • Brother combination machines (sewing and embroidery models) have an embroidery unit and built-in fonts. Attach the unit, choose the lettering function, and follow Method 4.
  • Brother sewing-only machines can’t run embroidery designs. Some computerized models include built-in alphabets (Method 1). Most can also do free-motion writing (Method 2), if you check how your model lowers the feed dogs.

The same applies to other brands. Look up your model’s manual to see whether it lists lettering stitches or an embroidery unit.

Thinking of selling personalized items? Read whether owning an embroidery machine is profitable first.

The complete guide to machine embroidery

How to Use an Embroidery Machine: A Beginner's Guide
Read the guide

Keep exploring

Guides from other topics

All topics →