Machine Types and Brands

Sewing Machine Types and Brands: How to Choose

A plain-English map of sewing machine types and brands, who owns what, what old names like Domestic and Ruby mean, and how to choose the right machine.

On this page
  1. The main types of sewing machine
  2. The major brands and who owns what
  3. Who makes the best home sewing machine?
  4. Old brand names you will see on used machines
  5. What is a “Ruby” sewing machine?
  6. Where are brand-name machines made? (Is Janome made in the USA?)
  7. How to choose: a practical sequence

Most people shopping for a sewing machine start with a brand name: Singer, Brother, Janome, maybe Bernina. The type of machine usually matters more. A mechanical machine, a computerized one, a serger and an industrial straight-stitch machine do very different jobs, and every major brand sells several of them.

This guide covers the main machine types first, then the brands and the companies behind them. It also explains a few older names you are likely to see on used machines, including “Domestic” and “Ruby”, and finishes with a practical way to choose.

The main types of sewing machine

Mechanical

Mechanical machines are controlled by dials and levers, not a circuit board. You turn one knob to select a stitch and others to set stitch length and width. They are usually the least expensive new machines. They are also simple to service and tend to last a long time. The trade-offs are fewer stitches, four-step (manual) buttonholes on most models, and no conveniences such as needle up/down or an automatic thread cutter. Our guide to non-computerized sewing machines goes into detail.

Computerized (and “electronic”)

Computerized machines use buttons or a touchscreen to select stitches. A small processor then controls needle position and stitch formation. They usually offer many more stitches, one-step buttonholes, needle up/down, speed control and often a start/stop button that lets you sew without the foot pedal. Some brands also use the word “electronic” for an in-between category: a machine with electronic motor or speed control but mechanical stitch selection. The labels aren’t used consistently, so read the specifications rather than relying on the name.

Embroidery and sewing/embroidery combos

Embroidery machines have a motorized arm that moves a hoop under the needle to stitch out digital designs. Some do embroidery only. Others are combination machines that also do regular sewing. Hoop size is the main specification that separates entry-level from high-end embroidery models.

Heavy-duty domestic machines

“Heavy duty” is a marketing category, not a technical standard. It usually means a home machine with a sturdy metal internal frame, a stronger motor and a higher top speed than a comparable standard model. These machines handle denim and canvas better than a light machine, but they are not industrial machines. We explain the details in what separates a heavy-duty machine from a regular one.

Quilting and semi-industrial straight-stitch machines

Quilters often want more space to the right of the needle (the “throat” or “harp” space), an extension table and a walking foot. Some brands also sell semi-industrial straight-stitch-only machines for home use, such as Juki’s TL series. These sew fast and steadily but do no zigzag.

Sergers and coverstitch machines

A serger (overlocker) trims the fabric edge and wraps it in thread as it sews, using loopers instead of a bobbin. It finishes seams and sews knits well, but it can’t replace a regular machine for zippers, buttonholes or topstitching. A coverstitch machine makes the twin-row stretch hems you see on T-shirts. See serger vs sewing machine for whether you need both.

Industrial machines

Industrial machines are built for production work. They sit in a table with the motor mounted underneath, usually do one job (straight stitch, walking foot, overlock and so on), and run much faster than home machines. They suit high-volume or very heavy work but are a poor fit for most hobbyists. See our industrial vs domestic comparison.

Vintage and treadle machines

Older all-metal machines, from treadle and hand-crank models to the electric machines of the 1950s and 1960s, are still widely used. Many are simple, durable and repairable. The catch is that parts, bobbins and sometimes needles can be specific to the model. Our guide to buying a used or thrift store sewing machine covers what to check.

The major brands and who owns what

Many brand names sit inside a small number of companies. Knowing the corporate families helps explain why some machines share parts, feet or even designs.

Brand Origin Generally known for Related brands
Singer United States (1851) Mass-market mechanical, heavy-duty and computerized machines Part of SVP Worldwide with Pfaff and Husqvarna Viking
Brother Japan Feature-rich entry and mid-range computerized and embroidery machines Independent
Janome Japan (1921) Reliable home machines across all price levels; early computerized models Owns Elna; historically absorbed New Home
Elna Switzerland Free-arm pioneer; now shares engineering with Janome Janome subsidiary
Juki Japan Industrial machines, sergers, semi-industrial straight-stitch machines Independent; not related to Janome
Bernina Switzerland (1893) Premium machines, dealer support bernette is its budget line
Pfaff Germany Built-in dual feed (IDT) on many models SVP Worldwide
Husqvarna Viking Sweden High-end sewing and embroidery machines, including the Designer Ruby line SVP Worldwide

For brand-specific detail, see our guides to Singer models, Elna and Janome history, whether Juki and Janome are related, Brother vs Singer and whether Bernina is worth the price.

You will also find many budget brands sold mainly online, such as Uten. These can be reasonable for light use. Check what warranty, parts and repair support are actually available before you buy.

Who makes the best home sewing machine?

There isn’t one best brand. Each major brand makes good and mediocre models, and the right machine depends on what you sew:

  • Mending and simple projects: a basic mechanical or entry computerized machine from any established brand is usually enough.
  • Garments: stitch quality, a one-step buttonhole and good feed on light fabrics matter more than stitch count. Add a serger later if you sew a lot of knits.
  • Quilting: look for throat space, a walking foot or built-in dual feed, and a steady straight stitch.
  • Heavy fabrics: a heavy-duty home machine, a vintage all-metal machine or a semi-industrial straight-stitch machine, depending on how thick and how often.
  • Embroidery: focus on hoop size and software compatibility.

Local service matters as much as brand. A machine you can get serviced nearby, with parts available, will usually serve you better than a slightly “better” model with no support in your area.

On the question of the strongest machine: industrial machines are far stronger than any home machine. Among home machines, the ones that cope best with thick work tend to be semi-industrial straight-stitch models, heavy-duty models and older all-metal machines. Even then, the right needle and thread make a large difference.

Old brand names you will see on used machines

Domestic

If you searched for a “Domestic brand sewing machine”, you probably have, or have seen, a machine with Domestic on it. Domestic was an American sewing machine company dating from the 1860s, with roots in Norwalk, Ohio. It made sturdy cast-iron machines, and the White Sewing Machine Company bought it in the 1920s. Later machines with the Domestic badge, especially from the 1950s onward, were generally made in Japan and resemble other Japanese metal machines of that era.

Older Domestic machines are usually all metal and fairly easy to clean and repair. As a rough guide from collector and seller discussions, a working Domestic in a thrift store or garage sale is often a modest purchase. Restored or unusual models with cases can sell for more. Before you buy, check that bobbins and bobbin cases for that model are still available. The used machine buying guide has a checklist.

New Home, White, Kenmore and others

Other names you’ll often see on second-hand machines:

  • New Home: an American brand from the 19th century. It later became part of Janome, and older Janome machines sold in some markets carried the New Home name.
  • White: an American company that bought several other brands, including Domestic, and later sold machines built by other manufacturers.
  • Kenmore: the Sears house brand. Kenmore machines were made under contract by several manufacturers over the decades.

These names can tell you roughly when and where a machine was made. Condition and parts availability matter more than the badge.

What is a “Ruby” sewing machine?

“Ruby sewing machine” usually refers to one of two very different machines.

New Home Ruby (vintage)

The New Home Ruby was a three-quarter-size shuttle machine introduced in the 1890s and made into the 1920s, in treadle and later electric versions. Collectors value it for its looks and sturdy build. It uses a long shuttle bobbin, and sources note that its original needle system is hard to find today. If you are buying one to use, check that it comes with its shuttle and bobbins, and research needle options before you pay.

Husqvarna Viking Designer Ruby (modern)

The Designer Ruby is a line of high-end computerized sewing and embroidery machines from Husqvarna Viking. Versions have included the Designer Ruby, Ruby deLuxe, Ruby Royale and Ruby 90. These are dealer machines with large touchscreens, large embroidery areas and wireless features, priced well above typical home machines. If you are considering one, buy from a dealer who offers lessons and service. Machines at this level are complex, and dealer support is a large part of their value.

Where are brand-name machines made? (Is Janome made in the USA?)

Most home sewing machines sold today, from almost every brand, are made in Asia. Janome, for example, is a Japanese company that makes machines in Japan, Taiwan and Thailand. Its US arm, Janome America, handles distribution and support rather than manufacturing. Singer is an American brand by origin, but its current home machines are made overseas. See which country Singer comes from.

Country of manufacture is printed on the machine or its packaging. It’s worth checking, but it says less about quality than the model’s track record and the support available where you live.

How to choose: a practical sequence

  1. List what you will actually sew over the next year: fabric types, thickness and how often.
  2. Pick the type first. Choose mechanical vs computerized, add embroidery only if you want it, and decide whether heavy fabric or quilting space matters.
  3. Set a budget that includes extras: a walking foot, needles, thread and a first service.
  4. Shortlist two or three models from established brands at that level.
  5. Check support: the warranty, a local dealer or repair shop, and the availability of bobbins and feet.
  6. Try before you buy if you can, or buy from a seller with a fair return policy.
  7. Consider used. A serviced used machine from a good brand can be better value than a new budget one.

If you already own a machine and are buying needles, our guide on whether all needles fit all machines explains needle systems and sizes.

Keep exploring

Guides from other topics

All topics →