Sewing instructions assume you know what a take-up lever or a feed dog is. This guide explains the parts you’ll see on the outside, what’s going on inside, and the common sewing terms that come up in manuals and patterns. Exact names and positions vary between brands, so check your machine’s manual for its own diagram.
How a Sewing Machine Makes a Stitch
Nearly every home sewing machine makes a lockstitch from two threads:
- The needle carries the upper thread down through the fabric.
- As the needle starts to rise, the thread forms a small loop behind it.
- A rotating or oscillating hook below the needle plate catches that loop and carries it around the bobbin.
- The take-up lever rises and pulls the loop tight, locking the upper and bobbin threads together between the fabric layers.
- The feed dogs move the fabric forward by one stitch length, and the cycle repeats.
Most parts on the machine exist to time, guide or tension one of those steps.
External Parts, From Top to Bottom
Thread Path Parts
- Spool pin: holds the thread spool. It may be horizontal or vertical, and often comes with a spool cap that stops the spool from wobbling.
- Thread guides: hooks and slots that lead the thread along the correct path.
- Tension discs and tension dial: two discs that squeeze the upper thread. The dial sets how firmly they press. Raising the presser foot opens the discs, which is why you thread with the foot up.
- Take-up lever: the metal arm with an eye that moves up and down with every stitch. If the thread misses it, the machine will tangle almost straight away.
- Bobbin winder: a small spindle, usually on top or on the right, used to fill bobbins from the spool, plus its own tension guide.
Needle Area
- Needle bar: the vertical bar that moves the needle up and down.
- Needle clamp and clamp screw: hold the needle in the needle bar.
- Needle threader: a built-in lever on many machines that pushes a tiny hook through the needle eye.
- Presser foot: holds fabric against the feed dogs. Feet are often interchangeable; see our guide to types of presser feet.
- Presser foot lever (presser bar lifter): raises and lowers the foot, usually at the back or side of the needle area. Some machines also have a knee lifter.
- Presser foot pressure dial: on some machines, adjusts how firmly the foot presses down.
- Feed dogs: serrated teeth that rise through the needle plate and move the fabric. Many machines let you drop them for free-motion work.
- Needle plate (throat plate): the metal plate under the needle, with a hole or slot for the needle and engraved seam guide lines.
- Thread cutter: a small blade on the side of the needle bar area on many machines.
Bobbin Area
- Bobbin: the small spool that holds the lower thread. Machines are designed for specific bobbin types; see how to know what bobbin to use.
- Bobbin case: holds the bobbin and applies tension to the lower thread through a small spring and screw. On drop-in machines it usually stays in the machine under a clear cover. On front-loading machines it’s a removable metal case.
- Bobbin cover or slide plate: the cover over the bobbin compartment.
- Hook (shuttle): the part that catches the upper thread loop. It sits around or behind the bobbin case.
Controls
- Handwheel: the wheel on the right that turns the machine by hand. Turn it toward you.
- Stitch selector: a dial, buttons or touchscreen for choosing the stitch.
- Stitch length control: sets how far the fabric moves per stitch, usually in millimetres.
- Stitch width control: sets how far the needle swings side to side, for zigzag and decorative stitches.
- Reverse lever or button: sews backward for backstitching.
- Needle position, needle up/down, start/stop and speed controls: found on many computerised machines.
- Buttonhole lever: pulled down for one-step buttonholes on many machines.
- Foot control (pedal): controls speed. Pressing harder sews faster.
- Power switch and light.
Body
- Arm and bed: the arm is the upper horizontal section and the bed is the flat base. The space between them on the right is the harp or throat space, which limits how much fabric fits through.
- Free arm: a narrow section left when you slide off the accessory tray, used for sleeves and cuffs.
- Accessory tray or extension table.
Inside a Sewing Machine
If you take the covers off (which your manual may not recommend), you’ll typically find:
- Motor: in modern home machines, an electric motor, often connected by a belt to the main shaft. Some computerised machines use different drive arrangements.
- Upper (arm) shaft: runs through the arm and drives the needle bar and take-up lever through cranks and cams.
- Lower (hook) shaft: runs under the bed and drives the hook in time with the needle.
- Feed mechanism: cams and linkages that move the feed dogs up, forward, down and back. The stitch length and reverse controls change this motion.
- Zigzag mechanism: on zigzag machines, a cam or, in computerised machines, a stepping motor that swings the needle bar sideways.
- Tension assembly: the discs, spring and check spring behind the tension dial.
- Circuit boards and stepping motors: in computerised machines, these control stitch patterns, needle position and features like automatic thread cutting.
The timing between the needle and the hook is precise. If it slips, often after a hard jam, the machine may stop forming stitches altogether. That’s usually a repair for a technician.
Common Sewing Terms You’ll Meet
- Backstitch: a few stitches sewn in reverse to lock the start and end of a seam. Our guide to sewing machine stitches shows how.
- Basting: long, temporary stitches.
- Bias: the 45-degree diagonal of a woven fabric, which stretches the most.
- Grain: the direction of the threads in woven fabric. Lengthwise grain runs parallel to the selvage.
- Selvage (selvedge): the finished woven edges of fabric off the bolt.
- Seam: the line where pieces are sewn together.
- Seam allowance: the distance between the stitching and the raw edge.
- Staystitching: a line of regular stitches inside the seam allowance that stops curved edges from stretching.
- Topstitching: visible stitching on the right side.
- Right side / wrong side: the outer, printed face of the fabric and the inner face.
- Tension: the balance of pull between the upper and bobbin threads.
- Bird’s nest: a tangle of thread under the fabric, usually a threading problem.
Types of Sewing Machines
There isn’t one official count, but the common categories are:
- Mechanical sewing machines: stitches are selected with dials and the controls are mechanical.
- Computerised (electronic) sewing machines: stitches are selected with buttons or a screen, often with more stitches and automatic features.
- Embroidery machines: stitch designs within a hoop, either as embroidery-only machines or as sewing and embroidery combinations.
- Overlockers (sergers): trim and enclose seam edges using several threads.
- Coverstitch machines: make the double-row hem seen on T-shirts.
- Industrial machines: built for continuous production, often single-purpose.
- Quilting machines, including longarms.
When people ask about “the three main types” of home machines, they usually mean mechanical, computerised and embroidery machines. Another stitching machine you may hear of is the “lockstitch machine”, which is simply a name for a standard sewing machine.
The Five Main Groups of Sewing Tools
Sewing tools are often grouped like this:
- Measuring: tape measure, ruler, seam gauge
- Cutting: fabric scissors, rotary cutter and mat, thread snips
- Marking: tailor’s chalk, washable pens, tracing wheel
- Sewing and holding: pins, clips, hand needles, thimble, seam ripper
- Pressing: iron, ironing board, pressing cloth
Ready to put the parts to use? Our beginner’s guide to using a sewing machine walks through setup and your first seam.