Machine Embroidery

How to Digitize Your Own Embroidery Design: A Beginner's Walkthrough

A beginner's walkthrough of digitizing an embroidery design: software options, run, satin and fill stitches, underlay, stitch order and test stitch-outs.

On this page
  1. What digitizing actually means
  2. What you need
  3. Choose a simple first design
  4. The three basic stitch types
  5. Step-by-step walkthrough
  6. Underlay, compensation and density, explained simply
  7. Auto-digitizing: when it helps and when it doesn’t
  8. Test, read the stitch-out, and adjust
  9. Common beginner mistakes
  10. A note on copyright

What digitizing actually means

Digitizing is turning artwork into an embroidery stitch file. You decide what kind of stitch fills each part of the design, which direction the stitches run, how dense they are, and in what order the machine stitches everything. Software then creates a file your machine can read, such as PES, DST or JEF. Our guide to embroidery file formats explains the differences.

It’s not the same as converting an image. A picture has colors and shapes, while an embroidery file has thread, stitch direction and fabric pull to deal with. Good digitizing takes all of that into account. Expect your first few designs to need several test stitch-outs before they look right. That’s normal.

What you need

Software

Digitizing software ranges from free to professional:

  • Free: Ink/Stitch, an open-source extension for the Inkscape vector drawing program. It’s capable but has a learning curve, especially if you’re new to vector drawing.
  • Hobby-level paid: Embrilliance StitchArtist (an add-on to Embrilliance, sold in levels), and brand software such as Brother PE-Design, Janome Artistic Digitizer and Bernina Embroidery Software.
  • Professional: Hatch Embroidery and Wilcom EmbroideryStudio, among others. Hatch is built on Wilcom technology and aimed at home and small-business users.

Many paid programs offer free trials. Try one with a simple design before buying. Check that the software exports your machine’s format and runs on your computer (Windows, Mac or both).

Artwork

Start with clean artwork: a simple drawing, a vector file (SVG, AI or EPS), or a clear high-resolution image. Size it in the software to the actual size it will be stitched. A design digitized for a 4 inch hoop won’t simply scale up to 8 inches, or down to 2.

A machine, stabilizer and test fabric

You’ll need to stitch tests on the same kind of fabric and stabilizer as the final project.

Choose a simple first design

Good first projects:

  • A simple shape badge with two or three colors, like a circle with a star or a heart with a border
  • Bold block lettering, if your software has text tools
  • A line drawing using only run stitches (redwork style)

Avoid these at first:

  • Photos, gradients and shading
  • Tiny detail or thin lines
  • Lettering smaller than about a quarter inch (roughly 6 mm) tall
  • Designs with many overlapping colors

The three basic stitch types

Stitch What it is Use it for Notes
Run (running) stitch A line of single stitches Outlines, fine detail, line art, travel paths hidden under other stitching A triple or “bean” run gives a bolder line
Satin stitch Stitches zigzag closely from one edge of a column to the other Borders, narrow shapes, lettering Shiny and smooth. Very narrow columns don’t hold up well, and very wide ones can snag, so wide areas usually become fill
Fill (tatami) stitch Rows of stitches in a pattern Large areas Durable, flatter than satin. Density and angle matter

As rough guidance, many digitizers keep satin columns between about 1 mm and somewhere around 7 to 10 mm wide, and switch to fill beyond that. Rules of thumb vary with thread, fabric and software, so test.

Step-by-step walkthrough

Here’s the general process, using a simple example: a filled circle with a satin border and a run-stitch star in the middle. Exact tool names differ between programs.

1. Import and size the artwork

Import your image as a backdrop and set it to the final stitched size. Many programs let you fade the backdrop so you can see your stitches over it. Lock it so it doesn’t move.

2. Plan the stitch order

Embroidery is built in layers, from the back to the front:

  1. Background areas first
  2. Middle shapes
  3. Outlines, details and lettering last

Group objects by color where you can, to cut down on thread changes. In our example: the circle fill (color 1), then the star (color 2), then the satin border (color 3). The border is last so it covers the edge of the fill neatly.

3. Digitize the fill area

Use the fill tool to trace the circle. Set a stitch angle. Angles affect how the thread reflects light and how the fabric pulls. Many digitizers avoid running fill stitches perfectly horizontal or vertical on knits, and choose a diagonal instead. Use the software’s default density to start.

4. Digitize the details

Trace the star with a run stitch, or a triple run for a bolder line. Make sure it starts and ends close to where the next object begins, to minimize jumps.

5. Digitize the border

Use the satin or column tool to make a ring around the edge of the circle, overlapping the fill slightly so no fabric shows between them.

6. Check pathing and connections

Look at where each object starts and ends. Good pathing means short jumps, few trims, and travel runs hidden under stitching that comes later. Most software can show the sequence as a “stitch player” simulation. Watch it to spot long jumps and odd ordering.

7. Check lock stitches and trims

Lock (tie-in and tie-off) stitches stop the thread unravelling at the start and end of each object. Most software adds them automatically. Make sure trims are set where jumps are long, if your machine trims.

8. Save the working file, then export

Save in the program’s own format first, so you can edit it later. Then export to your machine’s format.

Underlay, compensation and density, explained simply

These three settings are what make digitized designs stitch well rather than just look right on screen.

  • Underlay is a layer of light stitching under the visible stitches. It attaches the fabric to the stabilizer, flattens the surface, and gives the top stitches something to sit on. Common types are center run (down the middle of a narrow column), edge run (around the inside edge), zigzag (for wider satin), and a light fill underlay for fill areas. Most software applies sensible underlay automatically. Beginners should usually leave it on.
  • Pull compensation makes shapes slightly wider than the artwork. Stitches pull fabric inward as they tighten, so a satin column digitized at exactly 3 mm may stitch narrower, and fills may leave gaps against their outlines. Stretchy fabrics usually need more compensation than stable ones.
  • Density is how close together the stitches are. Too loose, and fabric shows through. Too dense, and the design becomes stiff and bulletproof, puckers, and breaks thread. Start with the software defaults, and adjust after testing.

Auto-digitizing: when it helps and when it doesn’t

Most programs include auto-digitizing, which converts an image into stitches automatically. It can be useful for:

  • Very simple, bold shapes with flat colors
  • Getting a quick rough version to clean up manually

It often struggles with:

  • Small text and fine lines
  • Stitch order and pathing, which can produce many jumps and trims
  • Stitch angles and underlay that suit the fabric
  • Photographs and soft edges

Many digitizers use a mix: auto-digitize big simple areas, then manually redo detail, lettering and outlines.

Test, read the stitch-out, and adjust

Stitch the design on the same fabric and stabilizer as the final project. See which stabilizer to use for every fabric. Then look closely:

What you see Likely fix
Gaps between fill and border Increase pull compensation or the overlap
Puckering around the design Reduce density, check underlay, use more or better stabilizer, check the hooping
Fabric showing through fill Increase density slightly, or add underlay
Stiff, heavy design Reduce density, remove unneeded layers, or stop stitching areas twice
Outlines don’t line up with fills More stabilizer, better hooping, and more compensation or overlap
Narrow satin looks thin or breaks thread Widen the column, or switch to a run stitch
Lots of thread breaks in one area Too many stitches piled in one spot. Check overlaps and density
Many jump threads to trim Improve the stitch order, or add travel runs under later stitching

Change one thing at a time and test again, so you know what made the difference.

Common beginner mistakes

  • Digitizing at the wrong size, then scaling the stitch file a long way.
  • Making everything too dense.
  • Tracing artwork exactly, without allowing for fabric pull.
  • Letters and details too small to stitch cleanly.
  • Not saving the editable working file.
  • Testing on a different fabric from the final one.

Digitizing artwork doesn’t change who owns it. Characters, brand logos and other people’s artwork are generally protected. Digitizing them for sale, or for anything beyond personal use, can infringe the owner’s rights. Use your own artwork, artwork you have permission to use, or properly licensed designs. If in doubt, seek appropriate advice.

Once your file is ready, our beginner’s guide to using an embroidery machine covers loading and stitching it. For lettering projects, see our guide to embroidering names.

The complete guide to machine embroidery

How to Use an Embroidery Machine: A Beginner's Guide
Read the guide

Keep exploring

Guides from other topics

All topics →