Quick answer
The brands experienced machine embroiderers mention most are Isacord, Madeira, Floriani, Robison-Anton, Sulky and Glide. They’re known for consistent thickness, low lint, broad color ranges and reliable colorfastness. Budget multi-spool sets from brands like Simthread, New brothread and ThreadArt are widely used on home machines too. Opinions on them are more mixed, and results can vary between machines.
The “best” brand is usually the one your machine runs smoothly with, in the fiber your project needs, sold somewhere you can easily restock. If you’re new to this, buy a handful of colors from two brands and test them on your machine before investing in a full set.
What type of thread should you use for machine embroidery?
For most projects, 40 weight polyester embroidery thread is the safest starting point. Here’s how the main fibers compare:
| Fiber | Strengths | Trade-offs | Good for |
|---|---|---|---|
| Polyester | Strong, colorfast, generally bleach-resistant, good sheen | Can look slightly less soft than rayon | Almost everything, especially towels, kids’ clothes, workwear and anything washed often |
| Rayon | Very high sheen, soft hand, runs smoothly | Weaker than polyester, generally less resistant to bleach | Decorative pieces, heirloom work, items that won’t be bleached |
| Cotton | Matte finish, natural look | Weaker, more lint | Vintage-look designs, quilts, redwork |
| Metallic | Sparkle | Breaks more easily, needs a slower speed and a metallic or topstitch needle | Accents and holiday designs |
| Specialty (glow, variegated, matte poly, wool blends) | Special effects | Varies | Accents and novelty |
Embroidery thread is different from all-purpose sewing thread. It’s made for sheen and for running smoothly at embroidery speeds, not for seam strength. Use it for decoration, not construction.
Thread weight: why 40 wt is standard
In embroidery thread, a higher weight number means a finer thread.
- 40 wt is the standard most commercial designs are digitized for.
- 60 wt is finer. Digitizers sometimes use it for very small lettering and fine detail, but a 40 wt design stitched in 60 wt will look thin unless it was digitized for it.
- 30 wt is heavier. It gives bold coverage and suits designs digitized for it.
If a design looks gappy or thin, check that you’re using the weight it was digitized for before blaming the thread brand.
Machine embroidery thread brands compared
| Brand | Main fibers | Known for |
|---|---|---|
| Isacord | Polyester | A widely used polyester embroidery thread with a large color range. Made by Amann, the group behind Mettler. Often described as a benchmark for consistency |
| Madeira | Polyester (Polyneon), rayon (Classic), metallics | One of the long-established embroidery thread makers, with extensive color charts and a big specialty range |
| Mettler (Poly Sheen) | Polyester | A polyester embroidery line from Amann Mettler that’s widely sold through sewing dealers |
| Floriani | Polyester | Sold mainly through sewing and embroidery dealers. Positioned as a premium line with a high sheen |
| Robison-Anton | Rayon, polyester | A large color selection in both rayon and polyester, popular with commercial shops |
| Sulky | Rayon, polyester, cotton, specialty | Easy to find in many fabric and craft stores, with a wide range of weights and specialty threads |
| Glide (Fil-Tec) | Polyester | Often praised for smooth running and clean stitching |
| Gunold | Polyester, rayon | A European brand used in both commercial and home embroidery |
| Brother (and other machine brands) | Polyester | Colors that match the brand’s own on-screen thread charts, which makes following built-in designs easy |
| Simthread, New brothread, ThreadArt | Polyester | Budget multi-spool sets and mini cones with large color assortments |
Availability and product lines change, and the same brand may sell several different polyester or rayon lines. Check the fiber and weight on the spool, not just the brand name.
Budget multi-spool sets: worth it?
Budget sets are a reasonable way to build a big color range quickly, and many home embroiderers use them without trouble. Things to watch for:
- More variation from batch to batch and from color to color than with premium lines.
- More lint, which means cleaning the bobbin area more often.
- Spools without a thread-tail slot, so ends unravel in storage. A small piece of tape or a thread net helps.
- Run quality varies by machine. A thread that runs perfectly on one machine may shred on another.
A practical approach is to use budget thread for practice and color variety, and keep a few premium spools in your most-used colors (white, black, navy, red) for client work and items that will be washed often.
Don’t forget bobbin thread
The bobbin thread matters as much as the top thread for tension balance. Most embroiderers use a dedicated embroidery bobbin thread, commonly 60 or 90 weight polyester in white or black. It’s lighter than the top thread, so dense designs don’t build up a stiff layer on the back, and the top thread can pull the interlock slightly to the underside.
Prewound bobbins are convenient. Some home machines, though, are particular about bobbin size and shape, so check your manual before buying prewounds and make sure they’re the right style for your machine. If bobbin thread starts showing on top of your designs after changing bobbin brands, see our troubleshooting guide for bobbin thread showing.
Matching colors across brands
Design files often come with a color chart that lists thread numbers from one or two brands, often Madeira, Isacord or a machine brand. If you use a different brand:
- Use a conversion chart. Many thread makers and design sellers publish cross-reference charts. Treat them as close matches, not exact ones.
- Some embroidery software and machines let you pick a thread brand and show the nearest color numbers.
- Check the color in daylight against your fabric before stitching. Matches that look right on screen can look different in thread.
Spools, cones and thread stands
Home machines are designed around small spools, but larger cones are often cheaper per yard. If you use cones, put them on a separate thread stand behind the machine, so the thread can lift off smoothly before it reaches the first guide. Also pay attention to how the thread is wound:
- Stack-wound (parallel) spools generally feed best from a vertical spool pin.
- Cross-wound spools and cones are generally designed to feed off the end, from a horizontal pin or a stand.
Feeding thread the wrong way can twist it and cause breaks that look like a thread-quality problem.
What brand of thread does Bernina recommend?
Bernina doesn’t require a single thread brand. Many Bernina dealers stock Isacord for embroidery, and it’s commonly suggested for Bernina machines alongside Mettler threads for sewing. Your dealer is the best source for current recommendations for your model. In practice, any good-quality 40 wt embroidery thread should run well on a well-maintained Bernina.
Who makes embroidery thread?
Embroidery thread comes from a mix of large thread manufacturers and brands that commission or distribute thread made elsewhere. Some companies, like Amann (Isacord and Mettler) and Madeira, are long-established thread producers. Machine brands and many budget sets sell thread under their own label. For your purposes, what matters is consistency from spool to spool and how well it runs in your machine, not whose factory made it.
Storing thread so it lasts
Thread can become brittle and break more often as it ages, especially after years of heat, dryness or sunlight. To keep it in good shape:
- Store it away from direct sunlight and heat sources.
- Keep it covered or in closed boxes to reduce dust.
- If an old spool keeps breaking after you’ve changed the needle and rethreaded, try a fresh spool before adjusting tension.
Choosing a machine rather than thread? See which brand makes the best embroidery machine. New to it all? Start with our guide to using an embroidery machine.