Machine Embroidery

How to Embroider With a Regular Sewing Machine (Including Thread Painting)

Embroider with a regular sewing machine: free-motion setup, hooping, practice drills, a thread painting walkthrough, and fixes for nests and skips.

On this page
  1. Can you embroider with a regular sewing machine?
  2. Three ways to embroider on a sewing machine
  3. What you need
  4. Setting up for free-motion embroidery
  5. Your first free-motion practice
  6. Thread painting with a sewing machine
  7. Is thread painting the same as embroidery?
  8. Can you machine sew with embroidery thread?
  9. Fixing common free-motion problems
  10. Starting out: costs and basic stitches

Can you embroider with a regular sewing machine?

Yes. Most household sewing machines can do some kind of embroidery, even though they can’t stitch a digitized design file the way a dedicated embroidery machine does. With a regular machine, you are the one who moves the fabric, so the results look more like drawing with thread than like a factory logo. That hand-guided quality is exactly why many people prefer it for art pieces, quilts and one-off gifts.

If you’re weighing a dedicated machine instead, our comparison of sewing machines and embroidery machines explains what each does.

Three ways to embroider on a sewing machine

  1. Built-in decorative stitches. Many machines have scallops, vines, satin motifs and sometimes alphabets. You sew them in rows like any other stitch, with the feed dogs up. This is the easiest place to start.
  2. Free-motion embroidery. You lower or cover the feed dogs and move the fabric yourself in any direction. The needle becomes a pencil, and you can draw outlines, write words or fill shapes.
  3. Thread painting. This is free-motion embroidery taken further: dense, layered stitching in several thread colors that builds up shading and texture, a bit like painting with colored pencils.

For lettering specifically, see how to embroider a name with a sewing machine.

What you need

  • A sewing machine that lets you lower or cover the feed dogs. Most modern machines have a drop-feed lever or switch. Some older or basic machines come with a cover plate instead. Check your manual before buying anything.
  • A darning or free-motion foot. These feet hover just above the fabric (or hop with each stitch), so the fabric can move freely while the foot still holds it down at the moment the needle comes up.
  • A hoop. A wooden or plastic hand-embroidery hoop with a low profile, small enough to move freely under the machine’s arm.
  • Stabilizer. Tearaway or a fusible interfacing for light outline work. A heavier cutaway or several layers for thread painting.
  • Needles. A fresh 75/11 or 90/14 embroidery needle, or an 80/12 topstitch needle. Topstitch needles have a larger eye that’s kinder to decorative threads.
  • Thread. 40 weight polyester or rayon embroidery thread for sheen, or 50 weight cotton for a matte look. Use a lightweight bobbin thread in a neutral color, or match the bobbin to the top if the back will show. Our guide to machine embroidery thread brands compares options.
  • A removable marking pen or chalk for drawing your design.

Setting up for free-motion embroidery

  1. Draw your design on the right side of the fabric with a removable marker.
  2. Back the fabric with stabilizer.
  3. Hoop it “upside down” compared with hand embroidery. Lay the fabric over the outer ring, then press the inner ring in from the top, so the fabric sits at the bottom of the hoop. This lets it lie flat against the machine bed. If it floats above the needle plate, it will bounce with the needle and stitches will skip.
  4. Lower or cover the feed dogs and attach the free-motion foot.
  5. Select a straight stitch. With the feed dogs down, the stitch-length setting has little effect. Your hand speed sets the stitch length.
  6. Reduce the top tension slightly from your normal sewing setting. This lets the top thread pull the interlock a little toward the back, which keeps the bobbin thread from showing on top. Test and adjust on a scrap.
  7. Slide the hoop under the needle and lower the presser-foot lever. This step is easy to forget, because the foot doesn’t press on the fabric. Lowering the lever engages the upper tension. If you skip it, you’ll get a tangle of loose thread on the underside almost immediately.
  8. Bring up the bobbin thread. Turn the handwheel toward you for one full stitch, pull the top thread to draw a loop of bobbin thread up through the fabric, and hold both tails.
  9. Lock the start with several tiny stitches in one spot, then trim the tails.

Keep your fingers on the hoop rim or flat on the fabric well away from the needle. Free-motion feet protect you less than a regular foot does.

Your first free-motion practice

Stitch length depends on two things: how fast the needle goes and how fast you move the fabric.

  • Fast needle, slow hands: short, dense stitches.
  • Slow needle, fast hands: long stitches that may look jagged.

Most people find a moderate, steady machine speed with smooth, unhurried hand movements easiest to control. If your machine has a speed limiter, set it to medium.

Good warm-up drills:

  • Straight lines, then gentle waves.
  • Loops and figure eights.
  • Spirals from the outside in.
  • Writing your name in cursive, which is joined and so has no stops.
  • Filling a small circle with back-and-forth lines.

Don’t rotate the hoop constantly. Free motion lets you move in any direction, so practice stitching sideways and backward too.

Thread painting with a sewing machine

Thread painting builds an image from many layers of stitching, with different thread colors blended to create highlights and shadows.

  1. Pick a simple subject first: a leaf, a flower, a bird or a pet’s eye rather than a full portrait. Work from a printed reference photo.
  2. Stabilize heavily. Dense stitching pulls fabric inward and can warp it badly. Use a firm stabilizer, and hoop it with the fabric. Some quilters add a thin layer of batting for texture.
  3. Outline the main shapes in a mid-tone thread with a single line of free-motion stitching.
  4. Block in the mid-tones. Fill each area with stitches that follow the direction of the form, such as along petals, outward from the center of a flower, or in the direction fur grows. Stitch direction matters as much as color, because the thread’s sheen catches light differently in each direction.
  5. Layer darker shades for shadows and lighter shades for highlights. Let edges between colors overlap and feather into each other rather than meeting in hard lines.
  6. Check the back and the hoop often. Re-hoop if the fabric loosens, and trim tails as you go so they don’t get stitched in.
  7. Add final details last: veins, eye highlights or fine outlines, often in a single straight pass.

A zigzag stitch at a narrow width can be used to fill areas faster. Some thread painters use it for broad strokes and straight stitch for detail.

Is thread painting the same as embroidery?

Thread painting is a type of embroidery. Specifically, it’s a free-motion machine embroidery technique (and there are similar hand techniques, sometimes called needle painting). Embroidery is the broad craft of decorating fabric with stitches. Thread painting is one style within it, defined by dense, layered stitching that creates painterly shading.

Can you machine sew with embroidery thread?

Yes, for decorative work. Embroidery thread works well for topstitching, decorative stitches, free-motion work and appliqué edges. It’s generally not the best choice for construction seams that bear stress, such as crotch seams or bag handles. Embroidery threads are made for sheen and smooth running rather than seam strength, and rayon in particular is weaker than all-purpose polyester. For seams, use all-purpose sewing thread.

Fixing common free-motion problems

Problem Likely cause What to try
Big loops or a nest on the underside Presser-foot lever not lowered, so top tension isn’t engaged; or the machine was threaded with the foot down Raise the foot, rethread completely, then lower the lever before stitching
“Eyelashes” (loops of top thread on the back at curves) Moving the fabric too fast around curves, or top tension too loose Slow your hands on curves; increase top tension slightly
Bobbin thread dotting the top Top tension too tight for this thread Lower top tension a little; use a lighter bobbin thread
Skipped stitches Fabric lifting with the needle, or a worn needle Make sure the fabric lies flat on the bed; replace the needle
Thread shredding or breaking Needle eye too small, worn needle, or stitching too fast Switch to a topstitch or larger needle; slow down
Fabric puckering around dense areas Not enough stabilizer Add a heavier stabilizer or a second layer

For problems on a dedicated embroidery machine, see our embroidery machine troubleshooting guide.

Starting out: costs and basic stitches

Is embroidery a cheap hobby? Hand embroidery is one of the least expensive textile hobbies: a hoop, needles, floss and fabric are enough. Free-motion embroidery on a machine you already own adds only a foot, some stabilizer and thread. Dedicated embroidery machines are a much larger investment.

How can a beginner start? Practice the drills above on scrap cotton with a tearaway backing, then try a simple outline drawing, and only then move on to filled areas and thread painting.

The basic hand stitches. Lists vary, but the stitches most often taught first are running stitch, backstitch, stem stitch, split stitch, satin stitch, chain stitch, lazy daisy, French knot, blanket stitch and cross stitch. Free-motion machine work imitates several of these. A single straight line reads like backstitch, and tight back-and-forth fill reads like satin stitch.

When you’re ready for automated designs, our beginner’s guide to using an embroidery machine explains how dedicated machines work.

The complete guide to machine embroidery

How to Use an Embroidery Machine: A Beginner's Guide
Read the guide

Keep exploring

Guides from other topics

All topics →