Use a stretch needle for very stretchy fabrics with a lot of spandex, Lycra or elastane, such as swimwear, leggings fabric, dancewear and power mesh. Use a jersey (ballpoint) needle for everyday knits like cotton jersey, interlock, rib knit and sweater knits. Sizes 75/11 or 80/12 suit most light and medium knits, and 90/14 suits heavier ones.
Stretch needle vs jersey (ballpoint) needle
Both have a rounded point that slips between the loops of a knit instead of piercing them, but they’re designed for slightly different problems:
- Jersey (ballpoint) needle. The rounded tip pushes the knit loops apart, which reduces holes, snags and runs in cotton and cotton-blend knits. In the Schmetz range this is 130/705 H-SUK with an orange colour band.
- Stretch needle. It has a medium ballpoint plus a specially shaped eye and scarf (the scoop on the back of the needle). The scarf helps the hook catch the thread loop reliably on elastic fabrics, where skipped stitches are the main problem. Schmetz labels it 130/705 H-S, with a yellow colour band.
Other brands use their own names and colours, so go by the description on the packet.
Which needle for which stretchy fabric
| Fabric | Suggested needle | Typical size |
|---|---|---|
| Cotton jersey, T-shirt knit | Jersey/ballpoint | 70/10–80/12 |
| Cotton/spandex jersey (light stretch) | Jersey, or stretch if stitches skip | 75/11–80/12 |
| Interlock, rib knit | Jersey/ballpoint | 75/11–80/12 |
| Swimwear, Lycra, spandex, power mesh | Stretch | 75/11 |
| Activewear and leggings fabric | Stretch | 75/11–90/14 |
| Rayon/viscose jersey | Jersey or stretch | 70/10–75/11 |
| Ponte, double knit | Jersey or stretch | 80/12–90/14 |
| Sweater knit, sweatshirt fleece | Jersey/ballpoint | 90/14 |
| Stretch denim, stretch wovens | Jeans or stretch (test both) | 90/14 |
| Neoprene/scuba | Stretch, or a non-stick needle if friction is a problem | 90/14 |
If you’re not sure, buy a mixed pack of each type and test on scraps. It’s quicker than guessing.
Choosing the size
- Smaller needles (70/10–75/11) make smaller holes. Use them for fine, lightweight knits and swimwear.
- Medium (80/12) is a good default for T-shirt-weight jersey.
- Larger (90/14) suits thick knits, sweatshirt fleece and multiple layers, and fits slightly heavier threads.
Use the smallest size that sews reliably. On fine knits, a needle that’s too large can leave visible holes or start runs.
Why not a universal needle?
A universal needle has a slightly rounded point and works on many wovens. It can sew some stable knits, but on stretchy fabrics it often causes:
- skipped stitches, because elastic fabric flexes as the needle rises and the thread loop doesn’t form properly for the hook;
- small holes or runs, especially on fine knits, because the point cuts fibres instead of sliding between them.
Swapping to a jersey or stretch needle is usually the first and cheapest fix for knit problems.
Twin needles for knit hems
For T-shirt-style hems on a regular machine, use a stretch twin or jersey twin needle with a straight stitch. Common spacings are 2.5–4 mm. Check that your machine accepts twin needles. Before sewing, set the stitch width to zero (straight stitch) or select the machine’s twin-needle mode, so the needles don’t hit the needle plate. Our page on tension settings and stretch stitches for knit fabric covers twin-needle tension.
Still skipping stitches? Things to check
- Use a new needle. A slightly bent or dull needle skips stitches long before it looks damaged.
- Try the other type. If a jersey needle skips on a spandex fabric, try a stretch needle, and vice versa.
- Try another size. Sometimes going up or down one size solves it.
- Check the needle is inserted correctly: pushed fully up, with the flat side facing the direction your manual shows (usually the back).
- Rethread with the presser foot up, so the thread seats in the tension discs.
- Check the thread. Use a good-quality polyester. Our guide to thread for stretch fabric explains the options.
- Lower the presser foot pressure if you can, and avoid pulling the fabric.
- Clean the bobbin area. Lint from knits builds up quickly.
For sizes and types across every fabric, see the sewing machine needle sizes and types chart. For the full stretch-sewing setup, see sewing stretchy and tricky fabrics on a sewing machine.